Price:
US$329.99

Free Shipping

Eachine ET6 Horizontal Hit and Miss Complete Engine Model STEM Upgrade Gas Engine Toys

Compatibility

To confirm that this part fits your vehicle, please enter your vehicle's details below.

  • Year:

    Select

    • Make:

      Select

      • Model:

        Select

        • Submodel:

          Select

          • Trim:

            Select

            • Engine:

              Select

              • Clear All
              This part is compatible with 0 vehicle(s).
              Show all compatible vehicles
              This part is compatible with 1 vehicle(s) matching
              This part is not compatible with
              Recent searches

                • Year
                • Make
                • Model
                • Submodel
                • Trim
                • Engine

                  Description:

                  Brand: Eachine

                  Name:Eachine ET6 Horizontal Hit and Miss Complete Engine Model

                  Size: 180*125*125MM

                  Displacement: 6CC.

                  Cylinder diameter: 22MM.

                  Itinerary: 20MM.

                  Weight: 1610G

                  Material: Brass And Stainless Steel


                  This is a horizontal gasoline engine model, it is an ancient structure that uses water to cool. 

                  This engine uses a 90-degree helical gear transmission, and the flywheel speed limiter is connected with a large bevel in the middle. The engine will be more appreciated when working.

                  The engine uses a side valve design. Different ordinary valve structures further increase the difficulty of our processing. Through the compact side transmission mechanism, it can be seen that this is a unique engine.

                  You only need to add petrol to the tank and add the battery (3.7V) will be able to start it. 


                  Features:

                  Engine startup steps:

                  1.Open the bottom plate to check the wiring of the engine, connect the

                  fuel tank pipe, and install the three No. 5 batteries to close the bottom

                  plate.

                  2.Fill the fuel tank with gasoline (95#). When the filling is completed,

                  make sure there is no air in the oil pipe.

                  3.on the right side of the engine (installation of the flying hammer

                  position), slowly turn counterclockwise by hand to buy more than one

                  turn, its role can make the mixed gasoline fully enter the cylinder.

                  4.Turn on the power switch and turn the flywheel to start the engine

                  counterclockwise on the right side of the engine (installing the flying

                  hammer position).


                  Precautions:

                  1.If the ignition device is normal and the cylinder is under normal

                  compression, if the machine still does not start normally, it is very likely

                  that the carburetor needle should be adjusted.

                  2.screw the screw on the top of the carburetor, then loosen 1/4 turn, start

                  the flywheel, This can be done several times to make the mixing ratio of

                  gasoline and air reach the normal working mix ratio.


                  Note:

                  1.Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

                  2.Please allow little differs due to manual measurement.

                  3.Kids should be accompanied by adult.


                  Package Included:

                  1x Eachine ET6 Model

                  Leave a Comment