Price:
US$249.00
Compatibility
To confirm that this part fits your vehicle, please enter your vehicle's details below.
-
Year:
Select
-
Make:
Select
-
Model:
Select
-
Submodel:
Select
-
Trim:
Select
-
Engine:
Select
- Clear All
Show all compatible vehicles
- Year
- Make
- Model
- Submodel
- Trim
- Engine
Eachine Viswhoop 2.5 Inch 130mm 3-4S HD Cinewhoop FPV Racing Drone BNF Frsky D8/D16 DJI FPV Camera Caddx Vista
Specification:
Brand Name: Eachine
Item Name: Viswhoop 2.5 Inch 3-4S Cinewhoop
Wheelbase: 130mm
Size: 170mm*105mm*32mm
Weight: 124g (without battery)
Recommend Battery (Not Included) : 3S 650mah/750mah/850mah
4S 550mah/650mah/750mah/850mah
Features:
Light 2.5 Inch Caddx Vista Cinewhoop
Compatible both Frsky D8/D16 Radio transmitter and DJI FPV Radio transmitter
New design 1204 High efficiency brushless motors
Camera Angle adjustable
Smooth and powerful
Compatible both for 3s-4s Lipo/LIHV
Spare parts specifications:
Motor
|
Mode: EX1204 KV options: KV5000 Lipo cells: 3-4S Configu-ration:9N12P Stator Diamter:15mm Stator Length:4mm Shaft Diameter: Φ1.5mm Motor Dimension(Dia.*Len):Φ15mm*15mm Weight(g):5.5g |
Propellers
|
Brand Name: Gemfan Model: Flash 2540 Item Name: 2540 2.5×4 Inch 3-Blade Propeller Material: PC Center Mounting Hole: 1.5mm Hub Thickness: 5mm Blade Wideth: 9.9mm Quantity: 4 Pairs Weight: 0.98g |
Flight controller |
MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 8V-17V) Built-in 12A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Frsky D8/D16 SPI receiver Built-in 2.4G Power Amplification Built-in Betaflight OSD(SPI Control) Built-in Current meter Max 70A Built-in 5V 1.5A BEC Built-in voltage detection |
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 12A continuous peak 15A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_7.HEX Default protocol: DSHOT600 |
Internal Frsky D8/16 receiver Version |
SPI BUS receiver Frsky D8/D16 compatible Compatible Non EU or EU-LBT transmitter both D8 mode and D16 mode Channels: 8ch/16ch Dual antenna Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 400m |
DJI FPV Camera |
Sensor: 1/3.2'' CMOS Effective Pixels: 4M Lens: 2.1mm,f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150° (D);122° (H);93° (V) |
Caddx Vista
|
Brand Name: Caddx Item Name: Vista Kit Operating Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms, High Quality Mode(720p 60fps): 30-40ms Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot Supported Flight Control System: F3,F4,F7 Operating Temperature Range: 32° to 104° F (0℃ ~40℃) Input Power: 7.4-26.4V |
Package Includes:
1 x 130mm Frame Kit
1 x Toothpick F4 Flight Controller
4 x NC1204 KV5000 3-4S Motor
8 x Gemfan 2540 3-blade Propellers (4x CW, 4x CCW)
1 x Caddx Vista VTX
1 x DJI FPV Camera
1 x 2.5 Inch Propeller Guard