Price:
US$58.99
- Voltage: 1S,2S
- RC Drone Spare Parts: Flight Controller
Precise details:
Description:
JHEMCU GSF405A is a 1-2S F4 AIO that integrates a 4-in-1 brushless ESC and an ELRS 2.4G receiver. It has 5 serial ports (UART1, UART2, UART3, UART4, UART6), one I2C port, and one SBUS interface (The serial port used by SBUS is RX2), the built-in ELRS receiver is the UART1 port, there is a WS2812 LED light on the board, and the WS2812 interface is reserved. Built-in black box 8MB and barometer, with buzzer interface and camera interface. 5V power supply camera interface is reserved on the board.
Specification:
Flight controller:
CPU: STM32F405
Gyroscope/Accelerometer: MPU6000
OSD: AT7456E
Barometer: BMP280
Black box: 8MB
IIC: support
BEC: 5V
UART: UART1 (ELRS), UART2 (external RC), UART3, UART4, UART6
USB: micro usb
Size: 25.5*25.5MM M2
Receiver: ELRS(CRSF), TBS(CRSF), SBUS, IBUS, DSM2, DSMX
Support programmable LEDs such as WS2812
Support buzzer
Built-in voltage, current sensor
Weight: 3.3 grams
ELRS:
Frequency: 2.4GHZ
Working Agreement: CRSF(Betaflight)
Firmware: DIY_2400_RX_ESP8285_SX1280
ELRS receiver indicator status:
Double flash: Pairing mode
Slow flashing: no transmit signal received
Steady on: the transmit signal is received
Frequency pairing steps:
1. Connect the USB to power the flight controller. After plugging in the USB for the first time, disconnect the USB as soon as you see the LED light on the receiver goes out. Repeat the operation twice, when the USB is inserted for the third time, the LED will start to flash twice, and the receiver will enter the pairing mode.
ESC parameters:
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Input voltage: 1S-2S Lipo
Continuous current: 5A
Firmware: BLHELI_S S_H_50_REV16_7.HEX
Package Included:
1x GSF405A board
1x 2.4G Antenna
1x 2.0MM plug wire
1x 470UF/10V capacitor
4x M2*6.5MM shock-absorbing ball
1x 2S series board